The DWX-42W – is one of the most accurate standalone wet milling devices ever built. A smooth and steady ball-screw driven system provides exceptionally precise, esthetically accurate results for glass ceramic, composite resin, PMMA, and titanium applications. A fourth axis allows the DWX-42W to rotate and tilt pin-type material for deep undercuts, simultaneously producing multiple dental restorations with ease.

Paired with the AK-1 Abutment Milling System, the DWX-42W offers a complete solution for milling custom abutments from titanium blanks produced by popular manufacturers like DESS, NT-Trading, MEDETiKA®, and GeoMedi. Custom titanium abutments are easy to produce in-house using the DWX-42W and AK-1 Abutment Milling System. Switch in minutes to production of custom abutments, avoiding the hassles of outsourcing and making the production process faster, more convenient and more cost effective than ever.

• Millable material: Glass ceramics, Titanium alloy, Composite resins, PMMA, Sintered Zirconia
• Pin type (Width × depth × height): max. 40 × 20 × 20 mm (1.5 × 0.8 × 0.8 in.)
• Operating speed XYZ: 6 to 1800 mm/min (0.24 to 70.9 in./min.)
• Spindle speed: 15,000 to 60,000 rpm
• Rotary axis travel angle: A: ±360°
• Number of milling burs housed: 6
• Attachable milling bur: Shank diameter: 3 mm, dedicated milling bur
• Compatible compressed air: 0.18 to 0.22 MPa
• Interface USB, Ethernet (10 BASE-T/100 BASE-TX automatic switching)
• Control command sets: RML-1, NC code
• Power requirements: AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category: II, IEC 60664- 1), 2.1A
• Power consumption: Approx. 190 W
• Operating noise During operation: 70 db (A) or less (when not cutting)
• During standby: 48 dB (A) or less
• External Dimensions: Width × depth × height: 482 × 560 × 600 mm
• Weight: 61 kg 
• Order-No.: 58503000